What are the main design contents of the large-scale chicken farm construction project?(1)
Publish Time: 2023-07-07 Origin: Phoenix Breeding Equipment
1. Modern chicken farm design
The construction of standardized livestock and poultry farms can adapt to the requirements of agricultural industrialization, improve the quality and efficiency of agriculture and rural economy, and establish a timely supporting processing industry, so as to form a one-stop agricultural production system of planting, breeding, processing, and sales.
Cultivate new economic growth points, promote the development of the primary and secondary industries in the region, thus indirectly drive the tertiary industry, promote the healthy development of the livestock and poultry industry in the project area, accelerate the adjustment of the rural economic structure, and achieve the goal of enriching the people, farmers, and counties The second is to strengthen the protection and construction of the ecological environment, thoroughly control the "dirty, smelly, and chaotic" environment caused by waste, and beautify and purify the living environment.
2. Basic planning content of chicken farm construction
1) Site selection: avoid intensive breeding areas, and the water quality is better.
2) Feeding mode: Two-stage cage rearing for brooding and laying eggs.
3) Chicken house construction: Closed chicken house, cascaded or stepped feeding, cement floor, white cement on the wall, automatic drinking water, feeding, ventilation, manure cleaning, etc.
3. Construction plan of laying hen farm
1) Overall layout of the chicken farm
①Overall principle: Consider the convenience of epidemic prevention and organization of production. The layout of the site is divided into production area, office area, living area, auxiliary production area, sewage and manure treatment area and other areas.
②Arrangement principle: According to the dominant wind direction, terrain height and water flow direction, they are living area, office area, auxiliary production area, production area and sewage treatment area. If the terrain is inconsistent with the wind direction, the prevailing wind direction shall prevail.
2) The layout of the chicken farm: The overall planning should comprehensively consider factors such as the orientation of the chicken house, the spacing of the chicken house, roads, sewage, fire prevention, and epidemic prevention. Install fans, water curtains, small windows for ventilation, and adopt mechanical manure removal, mechanical feeding, automatic lighting, and automatic drinking water systems.
① Orientation of a single-house chicken house: Use east-west or south-to-east (or west) at about 15 degrees, which is conducive to improving the temperature of the winter house and avoiding summer solar radiation. The principle is to use the dominant wind direction to improve the ventilation conditions of the chicken house.
②Chicken house spacing: There are two types of single-row chicken houses and double-row chicken houses. The spacing between chicken houses is 10-20 meters for brooding and growing houses, and 10-15 meters for laying hens.
③Chicken farm roads: There are two types of chicken farm roads: clean roads and dirty roads. The clean roads are used to transport feed, chickens and eggs in the farm, and the dirty roads are used to transport manure, dead chickens and sick chickens. The two shall not be used interchangeably.
3) Construction of chicken farm auxiliary facilities
① Disinfection pool at the gate of the chicken farm: The farm area and the outside world should be clearly separated, and disinfection pools should be set up in different areas of the farm and at the entrance of the gate. The length of the vehicle disinfection pool is 1.3 to 1.5 times the length of passing vehicles. The depth of the disinfection pool is ~30 to ~50 cm.
②Chicken farm road design: The requirements of transportation and epidemic prevention should be considered in the design of roads in the farm. It is required that the clean and dirty should be separated, the diversion should be clear, not cross each other, the drainage should be good, and the road surface quality should be good. It is recommended to use a concrete structure for the road, with a thickness of 15 to 18 cm. , the concrete strength is above C20, and the distance between the road and the building is 2 to 4 meters. The minimum width of the road surface outside the venue is about 4 to 8 meters for two medium-sized cars to pass each other smoothly.
③Water supply and drainage design: The site has two wells for use and backup wells, and a pump house, water tower and pipelines need to be built. The production and domestic waste water is discharged through buried pipes, and the drainage route of the rainwater should be designed according to the terrain of the site, so as to achieve the principle of no water accumulation and smooth sewage when it rains.
④ Field circuit design: The operating voltage is 220V/380V, and the power supply should be selected nearby. The power of the transformer should meet the maximum power load in the field. A chicken farm with a high degree of mechanization must be equipped with a backup generator.
to be continued
If you are looking for quality poultry breeding equipment visit PHOENIX - they will cater to all your poultry farming needs.For more poultry equipment products visit our directory.
Phoenix Breeding Equipment Co., Ltd is a professional manufacturer and exporter that is concerned with the design, development and production of livestock breeding equipment. which can provide all kinds of poultry farm equipment, such as automatic feeding and drinking line, poultry nipple drinker, rabbit nipple drinker, poultry feeder, poultry drinkier, ventilation fan. Cooling pad , egg incubator,pvc pipe ,ss pipe etc. Check out our site to find the latest in poultry equipment. We hope you’ll fine the right products for you,, and how it allows you to scale up to the next level when you’re ready.
Whatsapp/Wechat:+86 18233772617
Email:linda@goldphoenixa.com